How to clean motorcycle helmet straps?

Whenever you are out on your motorcycle, whether you are doing tough stunts, jumps, accidents ( potential injuries), or races, safety is a major worry. Armour, knee pads, elbow shields, helmets, and other protective equipment can be used for this. The most crucial of all of these helmets, however, is to protect your head from serious unintended impacts and potential injuries such as brain damage, you should know how to clean motorcycle helmet straps.

However, they must be of good quality, long-lasting, and advanced features to do so, which necessitates a significant financial investment. Nevertheless, if you do not nourish your high-end motorbike helmet, particularly the chinstraps then you will not be able to get the premium service or warranty claim from it, not from a defective helmet. Thus, amid your hectic routine, set aside some time to maintain your motorbike helmet straps.

Here is a quick technique of how to clean motorcycle helmet straps by yourself instead of going to a bike shop.

What causes helmet straps to wear out swiftly?

Before moving on to how to clean helmet straps, you will need to find out the causes of falling apart of helmet straps.

Road Helmet straps are majorly ruined by oil and sweat that comes out from the body while riding or performing stunts. You might think about how it all comes together. A lot of sweat and oil escapes your body while riding a motorcycle, which is eventually absorbed by your helmet’s inner layer, cheek pads, and chinstraps. As a result, unsanitary and unpleasant odors, as well as a large number of bacterial germs, are produced.

These straps will be ruined in no time if you fail to wash them at that time. The fact that chinstraps are irreversible in even the most popular brands discourages riders from washing them from time to time. Furthermore, because most users have little knowledge about how to clean motorcycle helmet straps, they utilize inappropriate cleaning materials. These factors diminish the helmet straps’ durability and usability resulting in a large number of defective helmets.

Things you should use

Mild soaps or detergents: The market is flooded with a range of soaps and detergents. Only mild soaps or detergents are effective at cleaning the sensitive textiles of chinstraps. As a result, be sure to clean your concrete road bike helmet pads and straps using mild cleaning motorcycle materials.

Brush:  You can use a light, soft brush, or old toothbrush to clean your sensitive straps.

Lukewarm water: Using lukewarm water to remove odors and dust from a soft cloth is quite effective. To obtain the finest cleaning helmet strap, use a mixture of water and mild soap along with the soft cloth is needed.

You can begin the primary cleaning process once you have gathered all of these items. Look at what you should stay away from first.

How to clean motorcycle helmet straps?

Step-1: You must first remove the inside helmet padding of your helmet liner so that it does not become wet during that period of time.

Step-2: Use a soft bristle and gentle stream brush to take out any sodium chloride, dust, or garbage lodged in the helmet straps’ microscopic hole.

Step-3: Bend the straps slightly to reach all the gaps of it and then remove the dust and sodium chloride (salt) deposits.

Step-4: Soak the straps in a shower of gently warm water until completely saturated.

Step-5: Brush the straps one more time to remove any remaining residues

Step-6: By using the brush with soap and mild detergent, softly rub the straps. Avoid strong soaps

Step-7: Continue rubbing the straps with the brush until all dust and filth have been removed from all touchable and hard-to-reach areas.

Step-8: Quick rinse the straps under running excess water until all of the soap has been wiped away.

Step-9: Allow the straps to dry in the open air. You can even use a fan to speed things up.

Step-10: Once the straps are in the drying process, smell them to see whether they have a terrible odor.

Step-11: When the odor persists, you should use an antibacterial shoe spray, or bug spray to spray throughout the straps to kill germs and eliminate the foul odors.

What materials should be used as straps for users with sensitive skin? 

You can use a different alternative material instead of the straps if you have sensitive skin. As the material used in the helmet contains polyester, which can harm in a way to sensitive skin people. People often endure itching, lice infestation, and markings on their face and neck areas. Moreover, you can use leather instead of polyester.

The leather of faux leather are wonderful alternatives since they keep your helmet dry and your body cool.

How to clean a smelly bike helmet?

You can use any of your shoe’s antibacterial ingredients’ spray. The other option can be, use a small amount of Johnson and Johnson’s baby hair shampoo with a sink full of water. Now combine the shampoo with the water. This shampoo works wonders in removing all the body oil particles from the helmet and helps in getting rid of the smell in a little time. This is how to clean motorcycle helmet straps if you have a smelly helmet.

 How to wash a bike helmet?

When the inner lining and pads are not removable, you can soak the entire helmet in a large bucket or a sink. Fill it with water and pour some baby shampoo such as Johnson and Johnson baby shampoo instead of dish soap. After that mix the combination well and soak the helmet for at least 10 to 15 minutes before carefully removing the filth with your fingers. This is how to clean a motorcycle helmet.

 How to clean bicycle helmet straps?

  • Remove the inner helmet padding from the helmet, along with the dust, mineral deposits, or debris. All this can be removed with the help of a gentle dry brush.
  • Twist and spin the straps on either side to clean every nook and cranny before soaking them in water. If they are not adequately removed and become moist, the salt deposits will be absorbed by them.
  • Soak these straps in Luke warm water for a few minutes.  
  • Set aside the helmet clean and let it dry naturally.

The best tips for keeping the visor of your motorcycle helmet clean.

The helmet on a motorcyclist is like his crown. It acts as a distinguishing factor that distinguishes one rider from another. One of the most crucial pieces of riding equipment a cyclist can purchase is a helmet, but unlike other pieces of regular riding equipment, it requires particular maintenance. Considering how expensive today’s helmet visors are, to begin with, they must remain pristine and unscratched. A helmet’s visor acts as a window through which one may perceive approaching danger.

The majority of helmets on the market today include rapid visor release mechanisms, making it more straightforward than it was with older models to take out or replace the visor. When purchasing a new helmet, search for this simple visor release mechanism since it makes visor cleaning easier, albeit it shouldn’t be the sole deciding factor.

It is usually advised to wipe a visor after each ride to keep it in good condition since smashed-on bugs, insects, and dirt may be readily removed if they haven’t hardened over time. Simply remove the visor from the helmet, immerse it in water, and then wipe down the surface with a microfiber towel to completely clean it. as you are In a different situation, if you are too lazy to take off the visor, you have to spray it with a Motul Visor Cleaner spray (available at Grandpitstop.com) and lightly wipe it to make it as clear as new.

Never try to “dry wipe” the visor surface since it will undoubtedly result in significant scratches that no chemical or cleaning can fix. Additionally, if you neglect to bring a microfiber cloth, use face wipe tissues instead because they work just as well and won’t damage the visor. When cleaning the helmet, be sure to avoid using any sprays containing oil.

FAQs:

How do you deep clean a motorcycle helmet?

  • Use mild dish soap, dishwashing detergent, liquid soap, or any water-based cleaners in a bucket of water
  • Soak the helmet for 15 minutes
  • With the help of a sponge rub it gently
  • Let it dry and go for the surface finishing.
  • Keep the habit of washing helmets from time to time to avoid smells, oil, etc.

How do you clean a smelly bike helmet?

Use baby shampoo or dishwashing detergent instead of abrasive detergents for getting rid of the smell. Mix it with the soapy water, soak and then rub it gently. Finally, wash it with normal water. This simple and safest helmet cleaning process can tell you how to clean motorcycle helmet straps for smelly ones in the entire process.

How do I get the sweat smell out of my helmet?

Soak the helmet for 15-20 minutes in a bucket of soapy water.

How do you get Mould off a bike helmet strap?

Soak the full-face helmet in a concentrated bio soft microfiber cloth washing liquid and then wash it.

Conclusion

Sweaty helmets, moldy full-face helmets, oily helmets, and so on. We have covered all the parts of how to clean motorcycle helmet straps, making it easier for you to follow up when you step out for the safest helmet cleaning.

6 thoughts on “How to clean motorcycle helmet straps?”

Leave a Comment