ATV helmet vs motorcycle helmet |6 big Difference

Based on the terrain and riding style, different types of helmets are out in the market for compatibility. Amongst them, ATV (all-terrain-vehicle) helmets and motorcycle helmets are the well-known headgear used for off-road and on-road riding respectively. For plain terrain, a simple motorcycle helmet is adequate that encounters all the aspects regarding rider’s protection.

However, this will not be good enough to be used for riding on an ATV vehicle because the terrain is different so for that, an ATV helmet is used. In this article, you will get to know the vital details on ATV helmet vs motorcycle helmet that will highlight how they are different from each other and why a simple motorcycle helmet is not compatible with off-road riding. 

ATV helmet vs motorcycle helmet – comparison table

Before moving toward the comparison, it is significant to know why and where they are used. In that context, this is to say that

An ATV helmet is used by the one who rides over rough and uneven terrain with his ATV (all-terrain-vehicle) which tends to be a four-wheeler with a single seat for the driver. On the contrary, a motorcycle helmet is used by those who ride on even roads, local streets, or motorways with a typical two-wheeler motorcycle.

Since the ultimate place of riding is different; the protection requirements also vary and accordingly the structure of both helmets is made different to ensure maximum safety. 

An outlook of their design has been presented below in the comparison table that shows their similarities and differences. Have a look at it.    

FeaturesMotorcycle helmetATV helmet
VisorIntegratedNot integrated
Eye protectionSun shield/visor/gogglesOnly by goggles
Chin guardVery simple and without ventspointed structure and contains vents
VentsOn the outer shell/rarely on the chin barOn shell and chin guard
PeakNot integrated Integrated 
Outer shell & LinerAvailable for head protectionAvailable for head protection

Difference between ATV helmet and motorcycle helmet

In the following details, the structures and features of both helmets have been demonstrated in detail to differentiate them explicitly. Each factor has been described for both helmets. 

1. Face protection

Being a crucial factor, face shielding is of utmost significance in every headgear. 

Regarding a motorcycle helmet, in some of its types, face protection is provided whereas in the rest there is no such provision. Such as in full-face helmet and modular helmet; a visor is built that covers the eyes, nose, and mouth. Sometimes, a sun shield inside the visor is also provided for sun glare protection. 

However, in an open-face helmet, a face shield is provided covering entire face from forehead to chin. 

But this is not found in every such helmet. In the half helmet, there is no visor or face shield provided so it remains open to the environment. In open-face and half helmet people commonly use goggles for eye protection in the absence of a visor. 

Coming towards the ATV helmet, a visor is not provided rather goggles are used. While learning about ATV helmet vs motorcycle helmet, it is important to know the reason behind it. So the logic behind this is that while riding, the dust chunks of rigorous terrain can settle on the visor making it unclear.

This will eventually become challenging for crusaders. Moreover, in winter; the fog can prevail on the outer as well as the inner side of the visor due to exhalation. For these reasons, only the goggles are used for eye protection against the blazing sun. 

2. Chin bar

It is observable in an ATV helmet more than in a motorcycle helmet. In a regular motorbike helmet, the chin guard does not consist of vents often but in an ATV helmet, you will always find vents that are made for enhanced airflow because an ATV rider does more workouts. 

Also, the pointed chin bar in an ATV helmet is made almost like a snowball helmet that is rigid and extended forward unlike a motorcycle helmet. Such a chin guard guarantees utmost safety in case of an accident by protecting the jaws and chin. 

Notably, in some types of motorbike helmets such as open-face and half helmet, the chin bar is not fabricated. 

3. Ventilation

In an ATV helmet, the ventilation is provided in the outer shell as well as the chin guard whereas, in a motorcycle helmet, it is provided only on the outer shell mostly. 

Besides vents provision, an ATV helmet is way airier than a bike helmet because it is visor-less so plenty of air will keep circulating inside the helmet to keep you fresh and cool. 

Out of the motorcycle helmet types, open face or half helmet have more aerodynamic structure so adequate ventilation takes place. But in the full-face and modular helmet, you can sweat profusely if the visor is not flipped up because the vents alone cannot get the ample air In. 

For this reason, some people keep the visor flipped up or choose an open face or half helmet. 

4. Peak on helmet

This is not found in motorcycle helmets but is apparent on an ATV helmet like other off-road helmets.

 The objective of integrating this peak is to:

  • Keep the rain off the face 
  • Prevent direct sunlight and glare from the eyes
  • Don’t let the tree branches get in contact with your face

However, in the context of an ATV helmet vs motorcycle helmet, this is to say that due to this peak, an ATV helmet is not as good as a motorcycle helmet that can take you more speedily without straining your muscles.

5. Head protective shell and liner

In both helmets, the outer shell and inner EPS liner serve the same purpose to protect the neck and head from injuries. The ATV and motorcycle helmet protect the brain from concussion by absorbing the shocking impact of energy if you fall in a ditch. 

Nowadays, advanced technologies such as MITS is being integrated into these helmets that reduce the rotational impact of force by sliding slightly.  Also, for the linear impact reduction; the WaveCel is being lined whose cellular structure further safeguards the skull. 

6. In a nutshell

By and large, the following are the differences between both helmets. 

An ATV helmet consists of a pointed chin guard and peak but a motorcycle helmet does not. 

In an ATV helmet, ventilation is provided in the chin guard besides the shell whereas, in a motorbike headgear,r only the outer shell contains vent channels mostly. 

The ATV head protector doesn’t contain a visor but a bike helmet consists of a visor or face shield in most of its types. 

Bottom line

As the name indicates, an all-terrain-vehicle (atv) helmet can be used on even as well as uneven terrain so despite having a different structure, it can be used in place of a motorcycle helmet too. People do not usually have any problem using it on plain roads with its open face design, chin guard, and peak. 

But, the reverse is not favoured such as a motorbike helmet is not good to be used as an ATV helmet because of less ventilation and visor which can fog up. 

However, it is suggested to ponder over the aforementioned ATV helmet vs motorcycle helmet details to take a better decision according to your preferences. 

Leave a Comment